Print Page - taranis setup za t-rex450

Title: taranis setup za t-rex450
Post by: zokizo on April 12, 2015, 03:28:11 pm

imam stari trexa 450 flybar sa quark ziroskopom

jel zna netko neki jednostavni setup tutorial ili jos bolje .eepe file

za ustimat taranis stanicu

Title: Odg: taranis setup za t-rex450
Post by: faldomak on April 12, 2015, 08:58:49 pm

Google loves You

http://openrcforums.com/forum/viewforum.php?f=57 (http://openrcforums.com/forum/viewforum.php?f=57)

Title: Odg: taranis setup za t-rex450
Post by: zokizo on April 12, 2015, 09:59:22 pm

google is your friend :)

ovi .eepe fileovi su za er9x
i kad ih otvaram u opentx companionu javlja da taj file nije za taj board valjda za taranis

Title: Odg: taranis setup za t-rex450
Post by: faldomak on April 12, 2015, 10:12:04 pm

http://openrcforums.com/forum/viewtopic.php?f=38&t=134 (http://openrcforums.com/forum/viewtopic.php?f=38&t=134)

----------------

eePe files are designed to be opened either in eePe or companion9x.It 'should' be just a matter of opening them. File menu, then open, then select the .eepm file you wish to look at. It opens as a new EEPROM screen with a MODEL01 in it. You may double click on the model, then you can simulate it, or edit it.If you already have and EEPROM window open, you can drag and drop this model into it.Note: The new EEPROM window that opened will have default settings and calibration values for the General settings. It is not a good idea to program it into your tx. Read your tx EERPOM, drag this new model into the loaded window, then write the updated EEPROM to the tx.You cannot update the templates within eepe with these, they are just models with example mixes to show how they work.

Title: Odg: taranis setup za t-rex450
Post by: zokizo on April 12, 2015, 11:30:26 pm

rijeseno nasao eepe file uploadao i sve radi

hvala na linku ;)

FlyFreak

RC Modeli => Helikopteri => Topic started by: zokizo on April 12, 2015, 03:28:11 pm